Equipped with a top-end, high-strength carbon fibre body, this durable road pedal features a sealed cartridge outer bearing for a smooth, low maintenance spin. A low-profile cleat-to-axle engagement increases pedalling efficiency, while the tension can be adjusted with extra-strong springs for more powerful riders.  Compatible with Ritchey and Look Keo cleats, the pedal is also kitted out with a wear-preventing, no noise stainless steel cleat plate, keeping you seamlessly attached to always be at one with your bike. 

Equipped with a top-end, high-strength carbon fibre body, this durable road pedal features a sealed cartridge outer bearing for a smooth, low maintenance spin. A low-profile cleat-to-axle engagement increases pedalling efficiency, while the tension can be adjusted with extra-strong springs for more powerful riders.  Compatible with Ritchey and Look Keo cleats, the pedal is also kitted out with a wear-preventing, no noise stainless steel cleat plate, keeping you seamlessly attached to always be at one with your bike. 

Look Keo Blade Carbon Cr Axle PedalsThese brilliant pedals are specifically designed for fast-paced road use as they offer phenomenal comfort and control. They feature a carbon body and blade construction which allows you to benefit from their superior strength to weight ratio as you soar past your competitors. Coming equipped with CrMo axles and stainless steel bearings, these superb components are more than capable of handling all the challenges of intense races while remaining light and aerodynamic. Features: Body Material: Carbon Blade Material: Carbon Axle Material: CrMo Bearing Material: Stainless Steel Use: Road Pedal Type: Clip-in Platform Area: 700mm² Platform Width: 67mm Part Number: PEKBC23407 Weight: 230g (approx)Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Keo 2 Max PedalsSlimmed down but with a wider, more efficient contact area, you get the best of both worlds with the revised Look Keo 2 Max Pedals. With a slimmer profile, these pedals look great on any bike and they provide a larger surface area to push against, optimising both comfort and power transfer.Features: Body Material: Composite Spindle Material: Oversized CrMo Intended Use: Recreational to competition Pedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats: Supplied with grey Look Keo Grip CleatsFloat: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Keo 2 Max PedalsSlimmed down but with a wider, more efficient contact area, you get the best of both worlds with the revised Look Keo 2 Max Pedals. With a slimmer profile, these pedals look great on any bike and they provide a larger surface area to push against, optimising both comfort and power transfer.Features: Body Material: Composite Spindle Material: Oversized CrMo Intended Use: Recreational to competition Pedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats: Supplied with grey Look Keo Grip CleatsFloat: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Keo 2 Max Carbon PedalsSlimmed down but with a wider, more efficient contact area, you get the best of both worlds with the revised Look Keo 2 Max Carbon Pedals. With a slimmer profile, these pedals look great on any bike and they provide a larger surface area to push against, optimising both comfort and power transfer.Features: Body Material: Carbon Spindle Material: Oversized CrMo Intended Use: Recreational to competition Pedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats: Supplied with grey Look Keo Grip Cleats Float: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 125g; Pair with Cleats: 312gTechnologies:Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Keo Sprint PedalsThe ultra-lightweight Keo Sprint pedals are ideal for occasional, leisure and new riders for an easy first step into the world of clip-in pedals. Boasting a state-of-the-art design which uses spring technology, these pedals allow you to adjust the tension between 8 and 12 for safe entry and release. Plus, thanks these pedal's reinforced stainless steel plate, you'll benefit from years of longevity and durability.Reliable and Strong Clipless PedalsThanks to the new design for how the spindle is fixed to the pedal's body, with a spacer to hold the needle bearings, these pedals promote better fluidity during rotation with less friction. To top it off, these superb pedals have undergone a rotational test of 2 million cycles at 100 rpm with a load of 90kg on the centre of each pedal before being approved. Whether you're a beginner or simply interested in a high-quality clip-in pedal duo to assist you when casually riding, this stunning pair has you covered.Features: Material: Plate: Stainless Steel; Axle: Cr-Mo Suitable For: Beginner, recreational and casual use Cleat Fitting:  SPD-SL; Speedplay; 2 bolt SPD type Highly aerodynamic 53mm spindle length Easy maintenance Pedal Weight: 140g per pedalBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Look Keo Blade Carbon Ceramic PedalThese premium carbon clipless pedals are lightweight, aerodynamic and powerful to optimise your performance until victory is yours. A weapon of choice among champions thanks to their impressive weight to power ratio, making them ready to tackle all the challenges of a long day in the saddle. Their ceramic bearings ensure the highest level of quality and performance while delivering a long lifespan. Additionally, their optimised and water resistant spindle is built around an oversized axle which saves approximately two watts at 100rpm. These are a perfect choice of upgrade for maintaining the edge over your competitors without sacrificing any weight.Features:  Material: Body: Carbon; Spindle: CrMo Steel; Bearings: Ceramic  Use: Race  Threading: 9/16x20mm  Stack Height: 14.8mm  Distance Pedal Spindle / Crankarm: 53mm  Platform Width: 67mm  Platform Surface Area: 700mm2  Tension: Pedals come installed with “12” carbon blades + additional “16” carbon blades(“20” carbon blades sold separately)  Cleats: Kéo Cleats-Gray  Float: 0°, 4.5° or 9° according to the cleat colour (Black, Grey, Red)  Pedal Weight: 110g (290g per pair with cleats and screws) Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Look Keo Blade Carbon Cromo Axle Road PedalsDrawing upon years of experience and with input from some of the most highly regarded champions of the sport, the revised Look Keo Blade Carbon pedals are designed to perform at the highest level and help you to win.Featuring all the benefits of a blade pedal, the Keo Blade Carbon pedals have an aerodynamically optimised shape with an increased platform size for superior performance and optimal efficiency. Supplied with 12Nm and 16Nm blades, they can be customised to suit your preferred feel.Features: Body Material: Carbon Spindle Material: Oversized CrMo Intended Use: Race Bearings: 1 roller bearing, 1 needle bearing Pedal Stack Height: 14.8mm Platform Width: 67mm Contact Surface Area: 700mm² Tension: Supplied with 12Nm carbon blades installed and additional 16Nm carbon blades (20Nm carbon blades sold separately) Cleats: Supplied with standard grey Look Keo Cleats Float: Black Cleat: 0°, Grey Cleat: 4.5°, Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 110g; Pair with Cleats: 288gTechnologies:Carbon Body and Blade Technology: Carbon lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer. Using a blade instead of a conventional metal spring has many advantages such as safer cleat entry & release, a more aerodynamic shape and a lighter weight.Optimised Spindle Profile: The Keo Blade pedal spindle was designed to obtain a very low stack height. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings, which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed. Spindle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction). Look spindles are only approved after a rotational test of 2 million cycles at 100rpm with a load of 90kg on the centre of the pedal and an eccentric rotation, which creates stress on each revolution. This is equivalent to a sprint by André Greipel of 1700 watts at 100rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.Ultra-Powerful Platform: To meet the demands of the most demanding cyclists, especially competitors, the pedal/cleat system must allow efficient power transfer thanks to a broad and rigid platform. Because of this, the Keo Blade Carbon platform is fitted with a 67mm wide, stainless steel plate that optimises the cleat/pedal contact area regardless of pedalling angle. With 700 mm² of surface area, the Keo Blade Carbon offers an optimised contact platform for an efficiency and power transfer that is unmatched on today’s market.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.