Angebote zu "Pedal-Roller" (12 Treffer)

Kategorien

Shops

Look Keo 2 Max Carbon Pedale - Schwarz
79,90 € *
ggf. zzgl. Versand

Look Keo 2 Max Carbon PedalsSlimmed down but with a wider, more efficient contact area, you get the best of both worlds with the revised Look Keo 2 Max Carbon Pedals. With a slimmer profile, these pedals look great on any bike and they provide a larger surface area to push against, optimising both comfort and power transfer.Features: Body Material: Carbon Spindle Material: Oversized CrMo Intended Use: Recreational to competition Pedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats: Supplied with grey Look Keo Grip Cleats Float: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 125g; Pair with Cleats: 312gTechnologies:Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Look Keo 2 Max Pedale - Weiß
69,99 € *
ggf. zzgl. Versand

Look Keo 2 Max PedalsSlimmed down but with a wider, more efficient contact area, you get the best of both worlds with the revised Look Keo 2 Max Pedals. With a slimmer profile, these pedals look great on any bike and they provide a larger surface area to push against, optimising both comfort and power transfer.Features: Body Material: Composite Spindle Material: Oversized CrMo Intended Use: Recreational to competition Pedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats: Supplied with grey Look Keo Grip CleatsFloat: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
SRAM NX Eagle Schaltwerk (12-fach) - Schwarz  -...
78,11 € *
ggf. zzgl. Versand

SRAM NX Eagle 12sp Rear MechAs seen on the top-of-the-line XX1 and X01 models, the NX Eagle rear derailleur also adopts SRAM's 1x specific X-Horizon cage design. This carefully engineered mechanism ensures capacity for the huge 11-50T cassette and compliments the smooth Performance of an Eagle 12 speed system. This derailleur also boasts SRAM's Type-3 Roller Bearing Clutch for unrivalled durability and quiet consistent performance. Features:  Material: Aluminium (cage), Steel (spring, pulley), Stainless Steel (hardware)  Max Tooth: 50T  Compatibility: All Eagle drivetrains  Speeds: 12 Speed  Compatibility: 1x12  Max Tooth: 50  Pulleys: X-Sync  Pull: X-Actuation  Technology Highlights: X-Horizon, X-Actuation, X-Sync 2, Roller Bearing Clutch, Cage Lock  Weight: 339gTechnologies  X-Horizon: The X-Horizon 'straight parallelogram' design limits all movement on the horizontal axis, which makes ghost shifting impossible while also reducing shift force. The large upper pulley offset design maintains a constant chain gap across all gears and guarantees faster and more exact shifting.  X-Actuation: Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire cassette. This makes gears easy to index and provides exceptional performance.    X-Sync 2: X-Sync 2 Eagle is the next evolution of SRAM X-Sync technology. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-Sync Eagle design reduces friction and the accumulation of mud, grit and grime.  Roller Bearing Clutch: The Roller Bearing Clutch delivers maximum drivetrain stability even through the most punishing terrain. This stability benefits the drivetrain dramatically, as derailleur bounce and chain slap are eliminated without sacrificing precision  Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into placeBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
CycleOps Basic Mag Kit - Gelb
121,51 € *
ggf. zzgl. Versand

CycleOps Basic Mag KitThe CycleOps Basic Mag Kit is the easiest way to train indoors. Simply place your bike on the turbo, dial-in the resistance unit, and pedal. It may contain the word "Basic" in the title, but a simpler, straight-forward approach to training fits the modern lifestyle; this trainer is easy and hassle-free to use, perfect for a no-fuss training session.Linear Resistance Curve Boosts Workout IntensityThis turbo trainer features a linear resistance curve to boost your workout intensity. With five adjustable level of resistance, you can mix up your interval sessions with ease. For the complete indoor training experience, the Basic Mag Kit comes with a trainer mat, riser block, and useful sweat towel. Features:Magnetic resistanceLinear resistance boosts workout intensity to match each pedal stroke and gear clickLevelling feet for easy adjustment on uneven surfacesDurable frameResistance unit roller allows for 700c, 26", 27" and 29" wheel sizes - up to a 2.0" tyreWill accept common road and MTB frames with included steel quick release skewerCompatible with rear dropout spacing: 120mm, 130mm and 135mmIncluded: Trainer mat, riser block, sweat towel, and QR skewerBuy CycleOps Nutrition & Training from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Look Keo Blade Carbon TDF Pedale (grün) 2018 - ...
135,99 € *
ggf. zzgl. Versand

Look Keo Blade Carbon TDF Pedals - GreenThe Look Keo Blade Carbon TDF (Tour de France) Pedals have been designed and developed  with input from some of the World's greatest cycling champions for optimal  efficiency and performance; the Keo Blade Carbon Pedals are built to get you on  top of the podium. This TDF special edition model celebrates green colour of the sprinter's jersey.Features:  Material: Body: Carbon; Spindle: CrMo  Bearings: 1 roller bearing, 1 needle bearing  Pedal Stack Height: 14.8mm  Platform Width: 67mm  Contact Surface Area: 700 square millimetres  Tension: Supplied with 12Nm carbon blades installed and additional 16Nm carbon blades (20Nm carbon blades sold separately)Technologies:  Carbon Body and Blade Technology: Carbon lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer. Using a blade instead of a conventional metal spring has many advantages such as safer cleat entry & release, a more aerodynamic shape and a lighter weight.  Optimised Spindle Profile: The Keo Blade pedal spindle was designed to obtain a very low stack height. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings, which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed. Spindle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction). Look spindles are only approved after a rotational test of 2 million cycles at 100rpm with a load of 90kg on the centre of the pedal and an eccentric rotation, which creates stress on each revolution. This is equivalent to a sprint by André Greipel of 1700 watts at 100rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.  Ultra-Powerful Platform: To meet the demands of the most demanding cyclists, especially competitors, the pedal/cleat system must allow efficient power transfer thanks to a broad and rigid platform. Because of this, the Keo Blade Carbon platform is fitted with a 67mm wide, stainless steel plate that optimises the cleat/pedal contact area regardless of pedalling angle. With 700 mm² of surface area, the Keo Blade Carbon offers an optimised contact platform for an efficiency and power transfer that is unmatched on today's market.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Look Keo Blade Carbon Rennrad Pedale (Titanachs...
209,99 € *
ggf. zzgl. Versand

Look Keo Blade Carbon TI Axle Road PedalsDrawing upon years of experience and with input from some of the most highly regarded champions of the sport, the revised Look Keo Blade Carbon pedals with titanium axles are super lightweight and designed to perform at the highest level to help you win.Featuring all the benefits of a blade pedal, the Keo Blade Carbon TI pedals have an aerodynamically optimised shape with an increased platform size for superior performance and optimal efficiency. Supplied with 12Nm and 16Nm blades, they can be customised to suit your preferred feel.Features: Body Material: Carbon Spindle Material: Titanium Intended Use: Race Bearings: 1 roller bearing, 1 needle bearing Pedal Stack Height: 14.8mm Platform Width: 67mm Contact Surface Area: 700mm² Tension: Supplied with 16Nm carbon blades installed and additional 12Nm carbon blades (20Nm carbon blades sold separately) Cleats: Supplied with grey Look Keo Grip Cleats Float: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied) Weight: Pedal: 95g; Pair with Cleats: 248gTechnologies:Carbon Body and Blade Technology: Carbon lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer. Using a blade instead of a conventional metal spring has many advantages such as safer cleat entry & release, a more aerodynamic shape and a lighter weight.Optimised Spindle Profile: The Keo Blade pedal spindle was designed to obtain a very low stack height. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings, which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed. Spindle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction). Look spindles are only approved after a rotational test of 2 million cycles at 100rpm with a load of 90kg on the centre of the pedal and an eccentric rotation, which creates stress on each revolution. This is equivalent to a sprint by André Greipel of 1700 watts at 100rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.Ultra-Powerful Platform: To meet the demands of the most demanding cyclists, especially competitors, the pedal/cleat system must allow efficient power transfer thanks to a broad and rigid platform. Because of this, the Keo Blade Carbon platform is fitted with a 67mm wide, stainless steel plate that optimises the cleat/pedal contact area regardless of pedalling angle. With 700 mm² of surface area, the Keo Blade Carbon offers an optimised contact platform for an efficiency and power transfer that is unmatched on today’s market.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Shimano XT M8000 2x11 Boost  Drivetrain Groupse...
471,19 € *
ggf. zzgl. Versand

Shimano XT M8000 2x11 Boost Drivetrain GroupsetThis superb groupset is specifically engineered for trail adventure as it's packed with some of the finest off-road technologies for a fast and reliable drivetrain experience. Additionally, this boost specific model is designed for boost type MTB frames, so its chainset has a wider chainline, ensuring clearance with your frames wider rear axle spacing.Shimano XT M8000 Boost 2x11 Speed Chainset with Double Chainring This top-quality chainset features new and improved materials and shifting technologies previously found only on the race level XTR components. This brings additional performance, and the optimal balance of durability, weight, and value to the trusted workhorse Shimano XT line.These cranks feature Hollowtech II technology for an unrivalled strength-to-weight ratio.Features:  Forged HollowTech II Aluminium cranks  Lightweight construction for external super-smooth bottom bracket bearings  Steel inner ring combined with a thicker Aluminium and Carbon composite Hollow outer ring for excellent rigidity and durability  Close ratio gear combination for minimum shifting gap provides improved cadence while reducing pedal feedback on suspension bikes  Plus 3mm outboard chain line (51.8mm) for use with 148mm rear axle width  HG-X chainring with patented spike pins give smooth and fast gear shifts under load  Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle  70° spider arm for optimal rigidity  For use with 11-speed HG-X MTB chains onlyShimano XT M8020 Direct Mount 2x11 Front MechThis superb front mech features a bold new design and approach. It is designed specifically with modern trail bikes in mind as its side-swing provides 15mm of increased tyre clearance, while new cable routing dramatically reduces shifting effort.Designed for larger wheels and longer travel.Features:  Swing Action: Side Swing  Cassette Compatibility: 11 speed  Maximum Capacity: Total capacity 10T  Top Gear Teeth: 34-38T  Cable Routing: Front-Pull  Chain Line:  48.8 (double crankset with a 48.8mm chainline is required/compatible)  Mounting Style: Direct mount frame required  Chainstay Angle: 66-69°Shimano XT M8000 Shadow+ 11 Speed Rear MechNow boasting improved stability, this high-quality rear mech delivers a light shift operation with 20% less effort. It is easier to adjust and with greater chain stability, the efficient shifting and smoother driving provided by this model makes life easier to navigate across tough trails.Features:  Shifting Action: Shadow RD+  Mount Type: Direct attachment (Conventional)/Direct mount compatible (w/o bracket spec available)  Maximum Sprocket: Low sprocket - 40/42T*, Top sprocket - 11T  Minimum Sprocket: Low sprocket - 40T, Top sprocket -11T  Front Difference: Max 10T  Total Capacity: 39T  Link Pin Bushings: 4  Shift cable comes with new hyper low-friction coating technology  Efficient pulley teeth design  Easy-to-adjust chain stabiliserXT M8000 11 Speed Bar Mount Trigger ShiftersThese top-notch shifters are ergonomically designed for prolonged enjoyment and ease of use. Simple and easy to incorporate into your cockpit with I-Spec II for horizontal and vertical positioning, this 11 speed trigger shifter is a simple yet effective upgrade.Features:  Rear Speed: 11 speed  Instance Release: Yes  2-Way Release: Yes  Optical Gear Display: Yes (only available with bar mount version, not I-spec)  Shift Cable Casing: Not included  Shift Cable: Low friction shift cableShimano XT M8000 11 Speed CassetteThis stunning cassette is light, durable, and comes with a chrome-plated finish to guard against corrosion. It features a closer gear ratio to provide efficient gear and cadence control, while its Hyperglide tooth configuration ensures crisp, clean shifting even when under load.Features:  High-performance 11 speed Dyna-SysII cassette  Close ratio gearing allows a more efficient use of energy through finer cadence control  Largest sprockets are mounted on lightweight Alloy carriers to reduce weight and increase rigidity  Sprockets are cut away and drilled to further reduce weight without reducing rigidity  Light and durable 46T sprocket  Chrome-plated finish offers hard wearing resistance to corrosion  Alloy cassette lockring  For 11-speed HG-X11 MTB chains  Weight: 450gShimano Ultegra 6800/XT M8000 HG701 QLink ChainThis 11-Speed Shimano Ultegra/XT chain is its super narrow lightweight 11-Speed HG-EV symmetrical design chain, which offers smooth, crisp shifting and comes. For fast complete tool free chain installation the Shimano Ultegra 6800/XT M8000 HG701 Chain comes complete with a Quick Link.Features:  Material: Stainless Steel  Number of Links: 116  Compatibility: Carbon spider with aluminium, titanium and steel cogs  Type: HG-X11  Pin Link Plate: SIL-Tec  Roller Link Plate: SIL-Tec  Roller: SIL-Tec  Outer plate design has been developed to reduce the chance of chain suck  Sil-Tec surface treatment technology (PTFE plating) on inner and outer links that is smooth running and increases durability  Zinc-Alloy plated outer links  The inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent running  5.62mm chain width, optimised for 11-speed Super Narrow HG-EV drivetrains  Comes complete with Quick Link, which enables fast tool free chain assembly  Weight: 257gA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Shimano XT M8000 2x11 Boost  Drivetrain Groupse...
471,19 € *
ggf. zzgl. Versand

Shimano XT M8000 2x11 Boost Drivetrain GroupsetThis superb groupset is specifically engineered for trail adventure as it's packed with some of the finest off-road technologies for a fast and reliable drivetrain experience. Additionally, this boost specific model is designed for boost type MTB frames, so its chainset has a wider chainline, ensuring clearance with your frames wider rear axle spacing.Shimano XT M8000 Boost 2x11 Speed Chainset with Double Chainring This top-quality chainset features new and improved materials and shifting technologies previously found only on the race level XTR components. This brings additional performance, and the optimal balance of durability, weight, and value to the trusted workhorse Shimano XT line.These cranks feature Hollowtech II technology for an unrivalled strength-to-weight ratio.Features:  Forged HollowTech II Aluminium cranks  Lightweight construction for external super-smooth bottom bracket bearings  Steel inner ring combined with a thicker Aluminium and Carbon composite Hollow outer ring for excellent rigidity and durability  Close ratio gear combination for minimum shifting gap provides improved cadence while reducing pedal feedback on suspension bikes  Plus 3mm outboard chain line (51.8mm) for use with 148mm rear axle width  HG-X chainring with patented spike pins give smooth and fast gear shifts under load  Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle  70° spider arm for optimal rigidity  For use with 11-speed HG-X MTB chains onlyShimano XT M8020 Direct Mount 2x11 Front MechThis superb front mech features a bold new design and approach. It is designed specifically with modern trail bikes in mind as its side-swing provides 15mm of increased tyre clearance, while new cable routing dramatically reduces shifting effort.Designed for larger wheels and longer travel.Features:  Swing Action: Side Swing  Cassette Compatibility: 11 speed  Maximum Capacity: Total capacity 10T  Top Gear Teeth: 34-38T  Cable Routing: Front-Pull  Chain Line:  48.8 (double crankset with a 48.8mm chainline is required/compatible)  Mounting Style: Direct mount frame required  Chainstay Angle: 66-69°Shimano XT M8000 Shadow+ 11 Speed Rear MechNow boasting improved stability, this high-quality rear mech delivers a light shift operation with 20% less effort. It is easier to adjust and with greater chain stability, the efficient shifting and smoother driving provided by this model makes life easier to navigate across tough trails.Features:  Shifting Action: Shadow RD+  Mount Type: Direct attachment (Conventional)/Direct mount compatible (w/o bracket spec available)  Maximum Sprocket: Low sprocket - 40/42T*, Top sprocket - 11T  Minimum Sprocket: Low sprocket - 40T, Top sprocket -11T  Front Difference: Max 10T  Total Capacity: 39T  Link Pin Bushings: 4  Shift cable comes with new hyper low-friction coating technology  Efficient pulley teeth design  Easy-to-adjust chain stabiliserXT M8000 11 Speed Bar Mount Trigger ShiftersThese top-notch shifters are ergonomically designed for prolonged enjoyment and ease of use. Simple and easy to incorporate into your cockpit with I-Spec II for horizontal and vertical positioning, this 11 speed trigger shifter is a simple yet effective upgrade.Features:  Rear Speed: 11 speed  Instance Release: Yes  2-Way Release: Yes  Optical Gear Display: Yes (only available with bar mount version, not I-spec)  Shift Cable Casing: Not included  Shift Cable: Low friction shift cableShimano XT M8000 11 Speed CassetteThis stunning cassette is light, durable, and comes with a chrome-plated finish to guard against corrosion. It features a closer gear ratio to provide efficient gear and cadence control, while its Hyperglide tooth configuration ensures crisp, clean shifting even when under load.Features:  High-performance 11 speed Dyna-SysII cassette  Close ratio gearing allows a more efficient use of energy through finer cadence control  Largest sprockets are mounted on lightweight Alloy carriers to reduce weight and increase rigidity  Sprockets are cut away and drilled to further reduce weight without reducing rigidity  Light and durable 46T sprocket  Chrome-plated finish offers hard wearing resistance to corrosion  Alloy cassette lockring  For 11-speed HG-X11 MTB chains  Weight: 450gShimano Ultegra 6800/XT M8000 HG701 QLink ChainThis 11-Speed Shimano Ultegra/XT chain is its super narrow lightweight 11-Speed HG-EV symmetrical design chain, which offers smooth, crisp shifting and comes. For fast complete tool free chain installation the Shimano Ultegra 6800/XT M8000 HG701 Chain comes complete with a Quick Link.Features:  Material: Stainless Steel  Number of Links: 116  Compatibility: Carbon spider with aluminium, titanium and steel cogs  Type: HG-X11  Pin Link Plate: SIL-Tec  Roller Link Plate: SIL-Tec  Roller: SIL-Tec  Outer plate design has been developed to reduce the chance of chain suck  Sil-Tec surface treatment technology (PTFE plating) on inner and outer links that is smooth running and increases durability  Zinc-Alloy plated outer links  The inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent running  5.62mm chain width, optimised for 11-speed Super Narrow HG-EV drivetrains  Comes complete with Quick Link, which enables fast tool free chain assembly  Weight: 257gA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot
Shimano XT M8000 2x11 Boost  Drivetrain Groupse...
471,19 € *
ggf. zzgl. Versand

Shimano XT M8000 2x11 Boost Drivetrain GroupsetThis superb groupset is specifically engineered for trail adventure as it's packed with some of the finest off-road technologies for a fast and reliable drivetrain experience. Additionally, this boost specific model is designed for boost type MTB frames, so its chainset has a wider chainline, ensuring clearance with your frames wider rear axle spacing.Shimano XT M8000 Boost 2x11 Speed Chainset with Double Chainring This top-quality chainset features new and improved materials and shifting technologies previously found only on the race level XTR components. This brings additional performance, and the optimal balance of durability, weight, and value to the trusted workhorse Shimano XT line.These cranks feature Hollowtech II technology for an unrivalled strength-to-weight ratio.Features:  Forged HollowTech II Aluminium cranks  Lightweight construction for external super-smooth bottom bracket bearings  Steel inner ring combined with a thicker Aluminium and Carbon composite Hollow outer ring for excellent rigidity and durability  Close ratio gear combination for minimum shifting gap provides improved cadence while reducing pedal feedback on suspension bikes  Plus 3mm outboard chain line (51.8mm) for use with 148mm rear axle width  HG-X chainring with patented spike pins give smooth and fast gear shifts under load  Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle  70° spider arm for optimal rigidity  For use with 11-speed HG-X MTB chains onlyShimano XT M8020 Direct Mount 2x11 Front MechThis superb front mech features a bold new design and approach. It is designed specifically with modern trail bikes in mind as its side-swing provides 15mm of increased tyre clearance, while new cable routing dramatically reduces shifting effort.Designed for larger wheels and longer travel.Features:  Swing Action: Side Swing  Cassette Compatibility: 11 speed  Maximum Capacity: Total capacity 10T  Top Gear Teeth: 34-38T  Cable Routing: Front-Pull  Chain Line:  48.8 (double crankset with a 48.8mm chainline is required/compatible)  Mounting Style: Direct mount frame required  Chainstay Angle: 66-69°Shimano XT M8000 Shadow+ 11 Speed Rear MechNow boasting improved stability, this high-quality rear mech delivers a light shift operation with 20% less effort. It is easier to adjust and with greater chain stability, the efficient shifting and smoother driving provided by this model makes life easier to navigate across tough trails.Features:  Shifting Action: Shadow RD+  Mount Type: Direct attachment (Conventional)/Direct mount compatible (w/o bracket spec available)  Maximum Sprocket: Low sprocket - 40/42T*, Top sprocket - 11T  Minimum Sprocket: Low sprocket - 40T, Top sprocket -11T  Front Difference: Max 10T  Total Capacity: 39T  Link Pin Bushings: 4  Shift cable comes with new hyper low-friction coating technology  Efficient pulley teeth design  Easy-to-adjust chain stabiliserXT M8000 11 Speed Bar Mount Trigger ShiftersThese top-notch shifters are ergonomically designed for prolonged enjoyment and ease of use. Simple and easy to incorporate into your cockpit with I-Spec II for horizontal and vertical positioning, this 11 speed trigger shifter is a simple yet effective upgrade.Features:  Rear Speed: 11 speed  Instance Release: Yes  2-Way Release: Yes  Optical Gear Display: Yes (only available with bar mount version, not I-spec)  Shift Cable Casing: Not included  Shift Cable: Low friction shift cableShimano XT M8000 11 Speed CassetteThis stunning cassette is light, durable, and comes with a chrome-plated finish to guard against corrosion. It features a closer gear ratio to provide efficient gear and cadence control, while its Hyperglide tooth configuration ensures crisp, clean shifting even when under load.Features:  High-performance 11 speed Dyna-SysII cassette  Close ratio gearing allows a more efficient use of energy through finer cadence control  Largest sprockets are mounted on lightweight Alloy carriers to reduce weight and increase rigidity  Sprockets are cut away and drilled to further reduce weight without reducing rigidity  Light and durable 46T sprocket  Chrome-plated finish offers hard wearing resistance to corrosion  Alloy cassette lockring  For 11-speed HG-X11 MTB chains  Weight: 450gShimano Ultegra 6800/XT M8000 HG701 QLink ChainThis 11-Speed Shimano Ultegra/XT chain is its super narrow lightweight 11-Speed HG-EV symmetrical design chain, which offers smooth, crisp shifting and comes. For fast complete tool free chain installation the Shimano Ultegra 6800/XT M8000 HG701 Chain comes complete with a Quick Link.Features:  Material: Stainless Steel  Number of Links: 116  Compatibility: Carbon spider with aluminium, titanium and steel cogs  Type: HG-X11  Pin Link Plate: SIL-Tec  Roller Link Plate: SIL-Tec  Roller: SIL-Tec  Outer plate design has been developed to reduce the chance of chain suck  Sil-Tec surface treatment technology (PTFE plating) on inner and outer links that is smooth running and increases durability  Zinc-Alloy plated outer links  The inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent running  5.62mm chain width, optimised for 11-speed Super Narrow HG-EV drivetrains  Comes complete with Quick Link, which enables fast tool free chain assembly  Weight: 257gA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 28.01.2020
Zum Angebot